5V Crimp
General Panel Information
| Application | Residential, Commercial, Industrial, and Agricultural panels | |
| Coverage | 23.5” panel coverage, with a 1/2” seam height | |
| Minimum Slope | Recommended slope 2/12 or greater | |
| Substrate | Recommended substrate 1/2”-5/8” plywood with a 30 lb. felt moisture barrier | |
| Length | Panels are continuous lengths from eave to ridge | |
| Fastening System | Exposed fastening system. Recommended that panels are fastened to substrate at center rib and inside rib of side lap, with a maximum spacing of 16" o/c. | |
| Fasteners | 1 1/2" self-sealing neoprene washer screws | |
| Materials | Panels are fabricated from 26 gauge or 24 gauge Galvalume* | |
| Coatings & Finishes |
-26 gauge pre-painted Galvalume* panels are available in over 10
standard colors. -24 gauge pre-painted Galvalume* panels are available in over 30 standard colors and coated with a full-strength Kynar 500** finish |
|
| Warranty | 25, and 35 year manufacturer warranties available | |
| Approvals & Testing |
- Florida Building Code and Miami-Dade HVHZ product approvals - TAS 125 (UL-580 uplift resistance test) - TAS 100-95 (wind driven rain test) - Class A Fire Rating (UL-790). |
Additional Information:
Panels
are also available in Aluminum and Copper.
All
flashings and accessories are fabricated from the same coil stock as the panels.
5-V
orders are all-inclusive: panels, clips, screws, and all flashings are
incorporated into one per square price.
*Galvalume sheet uses an aluminum (55%) - zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
*Kynar 500 is a
premium fluorocarbon coating with full strength Kynar 500 resin. This affords
maximum exterior durability due to its outstanding resistance to ultraviolet
radiation. These are the highest quality finishes available.
Downloads: 