DCSM now offers 2 different profiles of Ridge Anchor. Standard profile and the new Inverted profile.

We have developed the new inverted channel profile to hold foam or adhesive. It makes installation of hip/ridge cap much easier as it holds the foam or adhesive in place without running!

Ask us about it today!

(click on image to left for larger view)

Standard Ridge Anchor

(click image to zoom)

Inverted Ridge Anchor

(click image to zoom)

• RT600 adhesive with screw
• Foam (1 or 2 part) with screw
• Foam or adhesive with no screw

• FBC product approval #FL-6046
• FBC HVHZ approval # FL-8380
• Quality Assurance Program

• 26 gauge mill finish *Galvalume in 10’ lengths
• Other lengths available upon request
• Available in all DCSM standard colors

• 1 1/2" self-sealing neoprene washer screws spaced 16" o/c.
• Approved ring shank nails spaced 6" o/c., roof cement and membrane

• Available in 5 standard sizes of 4", 5", 6", 7" or 8" for various tile profiles.
• See our website for recommended sizes and profiles

• Designed to divert water.

• Fabricated from Galvalume* for corrosion resistance.

• Beveled top edge to form to standard hip/ridge tile.

• Easier and faster to install than traditional lumber and strapping

• All DCSM products are made from Galvalume not galvanized. Galvalume offers far superior corrosion resistance. Contact us for more details or literature.